STEP 1
IMPORTANT! ALWAYS TURN OFF THE BREWER AND REMOVE POWER BY UNPLUGGING THE POWER OUTLET BEFORE DOING ANY SERVICE ON ANY HIPSTER BREWER
STEP 2.
TURN OFF AND REMOVE THE WATER CONNECTION
Don't forget to turn off the water!!
STEP 3.
OPEN THE HEATCASE
STEP 4.
REMOVE OLD PCB
STEP 5.
INSERT NEW PCB
STEP 6.
CLOSE THE HEATCASE
Dont forget to reinsert the insulation plate
STEP 7.
REATTACH WATER PIPES, TURN ON THE WATER
STEP 8.
RECONNECT THE POWER TO THE BREWER, TURN ON THE BREWER