Please wait ....



Syncronizing with fortnox

GUIDE TO CHANGE...

GUIDE TO CHANGE BLOCK ELEMENT ON HIPSTER PULS

ESTIMATED TIME

25 minutes.

TOOLS NEEDED

Allen key (Hex key) 2.5 mm.
Allen key (Hex key) 5 mm.
TÅNG.
NOTE 1 Block heaters are connected directly to the mains. DO NOT WORK ON THE HEATERS WHEN THE POWERCORD IS CONNECTED TO THE HIPSTER.

STEP 1

IMPORTANT! ALWAYS REMOVE POWER BY UNPLUGGING THE POWER OUTLET BEFORE DOING ANY SERVICE ON ANY HIPSTER BREWER

STEP 2.

REMOVE THE UPPER BACK COVER

STEP 3.

REPLACE HEATER
  • Remove NTC
  • Remove OVERHEAT PROTECTION
  • Remove POWER CABLES
  • Remove WATER CONNECTIONS