STEP 1
IMPORTANT! ALWAYS TURN OFF THE BREWER AND REMOVE POWER BY UNPLUGGING THE POWER OUTLET BEFORE DOING ANY SERVICE ON ANY HIPSTER BREWER
STEP 2.
TURN OFF AND REMOVE THE WATER CONNECTION
Don't forget to turn off the water!!
STEP 3.
OPEN THE HEATCASE
STEP 4.
REMOVE THE WATERPUMP PANEL
STEP 5.
DICONNECT THE PUMP FROM THE PANEL
STEP 6.
MOUNT NEW PUMP
STEP 7.
REINSTALL WATERPUMP PANEL
STEP 8.
CLOSE THE HEATCASE
Dont forget to reinsert the insulation plate
STEP 9.
REATTACH WATER PIPES, TURN ON THE WATER
STEP 10.
RECONNECT THE POWER TO THE BREWER, TURN ON THE BREWER