ESTIMATED WORKING TIME 20 minutes. TOOLS NEEDED Allen key (Hex key) 2.5 mm..
STEP 1
IMPORTATNT ALWAYS REMOVE POWER BY UNPLUGGING THE POWER OUTLET BEFORE DOING ANY SERVICE ON ANY HIPSTER BREWER
STEP 2.
REMOVE THE UPPER BACK COVER
STEP 3.
REPLACE PUMP NOTE 1 Screws that fall down may be hard to pick up. Be carefull not dropping them! NOTE 2 When the pumps hoses are disconnected the airbreake will start to drain it self, have a bin ready to drain the water into. Also as seen in the movie, direct the pipe upwards when disconnected! NOTE 3 Check the connector on the flowmeter when the job is done. Its easy to get that out of place when changing the pump!