- GUIDE TO CHANGE OVERHEAT PROTECTION FUSE ON HIPSTER PULS
ESTIMATED WORKING TIME 15 minutes.
TOOLS NEEDED Allen key (Hex key) 2.5 mm..
TOOLS NEEDED Allen key (Hex key) 2.5 mm..
NOTE 1 Overheat fuses are connected directly to the mains. DO NOT WORK ON THE FUSES WHEN THE POWERCORD IS CONNECTED TO THE HIPSTER.
NOTE All HIPSTER brewers have two overheat fuses, one on each block. Make sure correct fuse is exchanged.
BEFORE YOU START
Overheat fuses, is resettable. On top of the fuse there is a button. By pressing (quite hard) on the button it should be resetted to its standard state. Follow this guide ro reset the fuse.